Royston Royfill Cold Fill


	One Step Casing Filter
	ROYSTON ROYFILL COLD FILL (#404-B) casing filler designed for smaller or shorter length casings. This casing filler is a specially formulated petroleum based compound with corrosion inhibitors and inert solids; pumped cold from 55 gallon drums. ROYFILL COLD FILL provides an effective protective environment for preventing and eliminating active corrosion and electrolysis from the annular space between the carrier pipe and casing.
	Basic Use ROYFILL COLD FILL for the prevention of galvanic and atmospheric corrosion in smaller or shorter length casings (200 feet or less) on both new and existing pipe. This ONE STEP, pump injected, petroleum based formulation fills and coats the pipe and casing, re–coating areas of damaged coating and eliminating electrolytic shorts by encompassing these areas with a high dielectric, non-conductive, protective barrier of wax and corrosion inhibitors. As the casing is pump injected with ROYFILL COLD FILL time proven formula, oxygen and moisture are eliminated from the casing and are prevented from being re-introduced into the protected space. Also available: ROYFILL HOT FILL CASING FILLER TECHNICAL SPECIFICATIONS
	Technical Data Color: Dark Brown. Service temp: -30°F to 100°F (-35°C to 37°C) Exterior Installation Temperature: 29°F to 160°F (-1.6°C to 71°C) Specific Gravity: 1.11 g/ml Flash Point: > 250 F (121°C) Mix Ratio: 3.6:1 by volume Weight / Gallons: 9.21 Pounds Properties: High Dielectric Strength, Anti–corrosive, Inert and Non–toxic Casing length: 200 feet or less Filler Comparision Application: CASING END SEALS Good quality casing end seals should be installed and inspected. End seals should have the ability to handle the low pressure of the drum injection pump application. ONE STEP APPLICATION No need for pre–treating casings prior to application. The corrosion inhibitor is already in the casing filler blend. INSTALLATION ROYFILL COLD FILL casing filler is pumped into the low end casing vent from 55 gallon drums with a pneumatic casing filler drum pump, available from Royston Laboratories. Additional Technical Data and Project Quotations are available from: CHASE CORPORATION ROYSTON LABORATORIES DIVISION 128 First Street Pittsburgh, PA 15238 Phone: 800-245-3209 Fax: 412-828-4826 Jkr02/09bFF

NEW PRODUCTS

ROYSTON HOT FILL

ROYSTON COLD FILL

ENVIROTAPE

T/R WRAP